SPRAY PAINT FORGE RED FJ825 400ML
Forge spray paint Pintyplus and primer matt epoxi to decorate and protect metallic surfaces. Thick and tough finish which produces an antique iron effect. Two in one: primer and finish. Resistant to abrasion. Excellent durability outdoors.
Applications for the forge paint
Quick dry paint with a very good adherence on metallic supports. Decorates and protects: railings, post boxes, exterior lamps, iron-gates, gardening stands, etc.
Technical characteristics
- Size 520/400ml.
- Spreading = 1 m2.
- Surface drying time in 15 minutes, total 24 hours.
- Repainted after 30 minutes.
How to apply the forge spray paint
The surface to be painted must be clean, dry and free of any contaminants. Clean the rust and the scales, if any, with a wire brush. Remove grease stains with solvent.
Shake the can vigorously during 1 minute after the mixing balls sound. Spray from a distance of 25/30 cm, applying thin and quick layers, first horizontally and then vertically. It is advisable to spray two thin layers instead of one thick layer in order to obtain uniform coverage and avoid paint sags.
Once the operation is completed reverse the can and push the nozzle until only gas comes out in order to prevent nozzle clogging.
Do not use on devices connected to the power grid and apply in ventilated areas.
Important: it is not necessary to use a previous primer.
Recommendations for use of the forge spray paint
On plastic or galvanized steel apply a specific primer to ensure perfect adhesion.
On painted surfaces, if properly adhered proceed with a light sanding to facilitate adherence, and if poorly adhered, remove it.
