-15%
SANITARYWARE RENOVATION SEMI GLOSS PAINT WHITE 1 LITER V33
Renovation Perfection paint + protection have been specially designed to durably renew highly stressed surfaces and materials. Thanks to the combination of specific polymers and the additiv system , a real booster of performance , it offers a high quality finish. ready to face all the hazards of everday life.
- High resistance to temperature variations.
- High adhesion
- High resistance to care & maintenance products
- Ultra washable
Preparation
Remove any silicone sealant before painting, Reseal after application of the paint. The support has to be clean, dry and non-greasy.
Application
- Application of the paint. Empty the additiv system (the sachet that is placed under the lid of the tin) into the paint. Stir the paint for 5 minutes, working around the bottom of the tin with a wide stick to mix it well. Disassemble the taps and / or apply masking tape on the areas to be protected. Remove areas of difficult access or around metal accessories with a brush. Apply the first layer to the foam roller , starting at the bottom and then up to the edges , working in strips of about 15cm. Do not start 2nd coat while its still drying. The painting may not be very covering , but the final result can be assessed in 2 layers. Remove the masking tape and allow to dry for 8 hours . Apply the same principle to your second coat and allow to dry for 8 hours before applying the protector.
- Application of the protection. Empty the additiv system (the sachet that is placed under the lid of the tin) into the paint. Stir the paint for 5 minutes, working around the bottom of the tin with a wide stick to mix it well. Apply from one end to the other. Follow with successive cross strokes. Leave to dry for 8 hours and apply a 2nd coat in the same way. It will be necessary to wait 7 days of drying before re -using your sanitary (immersion water, cleaning products).
Coverage: 1 liter= 3m2
Drying berofe 1st bath : 7 days
Tool cleaning : water
