Surface preparation - application:
Surfaces must be clean and dry. Remove dust , grease, salts and poorly adhering materials. For wooden surfaces fill with putty where is necessary and then sand smoothing with a suitable abrasive paper . After the preparation of the surface, apply one to two coats of velatura when it is completely dry, sand thoroughly with a suitable abrasive paper and then apply the finish coat.
Suggested application temperature from 10°C up tp 35°C .
Clean brushes, roller and equipment with white spirit after use.
Type: Alkyd based undercoat for enamel paint. Lead and chromates free.
Application method: Brush , roller, spray gun,
Thinning : Up to 5% v/v with white spirit.
Spreading rates: 15-18m²/lirt for each coat on previously prepared surfaces.
Dry times: Touch dry after 3 hours and recoatable after 16 hours. Drying time depends on weather conditions (humidity, temperature)
Colours : Its available in white.
Surface preparation - application:
Surfaces must be clean and dry. Remove dust , grease, salts and poorly adhering materials. For wooden surfaces fill with putty where is necessary and then sand smoothing with a suitable abrasive paper . After the preparation of the surface, apply one to two coats of velatura when it is completely dry, sand thoroughly with a suitable abrasive paper and then apply the finish coat.
Suggested application temperature from 10°C up tp 35°C .
Clean brushes, roller and equipment with white spirit after use.
Type: Alkyd based undercoat for enamel paint. Lead and chromates free.
Application method: Brush , roller, spray gun,
Thinning : Up to 5% v/v with white spirit.
Spreading rates: 15-18m²/lirt for each coat on previously prepared surfaces.
Dry times: Touch dry after 3 hours and recoatable after 16 hours. Drying time depends on weather conditions (humidity, temperature)
Colours : Its available in white.