INSTRUCTIONS FOR USE
Careful surface preparation is very important in order to achieve a perfect durable finish.
- All surfaces must be dry and clean from dust and grease
- Using a spatula, mix well amounts of LIQUID GLASS Α and hardener Β at a ratio of 100:60 respectively.
- Mix small
quantities each time since the mixture will start hardening within 1
hour approximately, depending on room temperature.
- If you apply the
material in layers make sure that each layer is applied before curing of
the previous to avoid line creation and reduced transparency.
- If you are using a mold, spray the surface with MINOS SILICONE SPRAY before pouring the mixture to avoid sticking.
- Apply the material into the mold taking care that there is no leak.
- Allow curing in a dust and moisture free place.
- If you are using LIQUID GLASS as a varnish spread material with a spatula.
Final curing is achieved in 4 - 7 days depending on layer thickness and room temperature.
It is not suitable for exposure to sunlight (UV).
Coverage: 1kg/m²/mm layer thickness
Thinning: no
Applications: by knife
Touch dry: 6-12 hours 20°C
Hard by: 4 - 7 days 20°C
Exterior - Interior use
Application temperature: 10°C - 35°C
Cleaning: with nitro solvent
Lightweight objects must be fastened to avoid floating or moving until final curing.
Close lids firmly after use and do not change lids between containers.
A test should be carried out before final application in order to ensure the compatibility of the materials to be bonded.
Metal containers (A+B): 1kg